Call for Application – Professional Training for Cisco Certified Network Associate (CCNA 200 – 231)

No

Module

Content

1

Network Fundamentals

• 1.1 Explain the role and function of network components
• 1.1.a Routers
• 1.1.b Layer 2 and Layer 3 switches
• 1.1.c Next-generation firewalls and IPS
• 1.1.d Access points
• 1.1.e Controllers (Cisco DNA Center and WLC)
• 1.1.f Endpoints
• 1.1.g Servers
• 1.1.h PoE
• 1.2 Describe characteristics of network topology architectures
• 1.2.a Two-tier
• 1.2.b Three-tier
• 1.2.c Spine-leaf
• 1.2.d WAN
• 1.2.e Small office/home office (SOHO)
• 1.2.f On-premise and cloud
• 1.3 Compare physical interface and cabling types
• 1.3.a Single-mode fiber, multimode fiber, copper
• 1.3.b Connections (Ethernet shared media and point-to-point)
• 1.4 Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
• 1.5 Compare TCP to UDP
• 1.6 Configure and verify IPv4 addressing and subnetting
• 1.7 Describe the need for private IPv4 addressing
• 1.8 Configure and verify IPv6 addressing and prefix
• 1.9 Describe IPv6 address types
• 1.9.a Unicast (global, unique local, and link local)
• 1.9.b Anycast
• 1.9.c Multicast
• 1.9.d Modified EUI 64
• 1.10 Verify IP parameters for Client OS (Windows, Mac OS, Linux)
• 1.11 Describe wireless principles
• 1.11.a Nonoverlapping Wi-Fi channels
• 1.11.b SSID
• 1.11.c RF
• 1.11.d Encryption
• 1.12 Explain virtualization fundamentals (server virtualization, containers, and VRFs)
• 1.13 Describe switching concepts
• 1.13.a MAC learning and aging
• 1.13.b Frame switching
• 1.13.c Frame flooding
• 1.13.d MAC address table

• 2.1 Configure and verify VLANs (normal range) spanning multiple switches
• 2.1.a Access ports (data and voice)
• 2.1.b Default VLAN
• 2.1.c InterVLAN connectivity
• 2.2 Configure and verify interswitch connectivity
• 2.2.a Trunk ports
• 2.2.b 802.1Q
• 2.2.c Native VLAN
• 2.3 Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)
• 2.4 Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)
• 2.5 Interpret basic operations of Rapid PVST+ Spanning Tree Protocol
• 2.5.a Root port, root bridge (primary/secondary), and other port names
• 2.5.b Port states (forwarding/blocking)
• 2.5.c Port Fast
• 2.6 Describe Cisco Wireless Architectures and AP modes
• 2.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)
• 2.8 Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)
• 2.9 Interpret the wireless LAN GUI configuration for client connectivity, such as WLAN creation, security settings, QoS profiles, and advanced settings

• 3.1 Interpret the components of routing table
• 3.1.a Routing protocol code
• 3.1.b Prefix
• 3.1.c Network mask
• 3.1.d Next hop
• 3.1.e Administrative distance
• 3.1.f Metric
• 3.1.g Gateway of last resort
• 3.2 Determine how a router makes a forwarding decision by default
• 3.2.a Longest prefix match
• 3.2.b Administrative distance
• 3.2.c Routing protocol metric
• 3.3 Configure and verify IPv4 and IPv6 static routing
• 3.3.a Default route
• 3.3.b Network route
• 3.3.c Host route
• 3.3.d Floating static
• 3.4 Configure and verify single area OSPFv2
• 3.4.a Neighbor adjacencies
• 3.4.b Point-to-point
• 3.4.c Broadcast (DR/BDR selection)
• 3.4.d Router ID
• 3.5 Describe the purpose, functions, and concepts of first hop redundancy protocols

• 4.1 Configure and verify inside source NAT using static and pools
• 4.2 Configure and verify NTP operating in a client and server mode
• 4.3 Explain the role of DHCP and DNS within the network
• 4.4 Explain the function of SNMP in network operations
• 4.5 Describe the use of syslog features including facilities and levels
• 4.6 Configure and verify DHCP client and relay
• 4.7 Explain the forwarding per-hop behavior (PHB) for QoS, such as classification, marking, queuing, congestion, policing, and shaping
• 4.8 Configure network devices for remote access using SSH
• 4.9 Describe the capabilities and functions of TFTP/FTP in the network

5

Security Fundamentals

• 5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
• 5.2 Describe security program elements (user awareness, training, and physical access control)
• 5.3 Configure and verify device access control using local passwords
• 5.4 Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)
• 5.5. Describe IPsec remote access and site-to-site VPNs
• 5.6 Configure and verify access control lists
• 5.7 Configure and verify Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)
• 5.8 Compare authentication, authorization, and accounting concepts
• 5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)
• 5.10 Configure and verify WLAN within the GUI using WPA2 PSK

6

• 6.1 Explain how automation impacts network management
• 6.2 Compare traditional networks with controller-based networking
• 6.3 Describe controller-based, software defined architecture (overlay, underlay, and fabric)
• 6.3.a Separation of control plane and data plane
• 6.3.b Northbound and Southbound APIs
• 6.4 Compare traditional campus device management with Cisco DNA Center enabled device management
• 6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
• 6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible
• 6.7 Recognize components of JSON-encoded data

Program & Time

Dates

Batch

Training Mode

Evening (06PM – 08 PM) Monday to Friday

23^rd September to 25^th October 2024

1

Classroom based: Deso IT Lab